|
|
Post by stupot on Oct 28, 2020 21:24:17 GMT
I have the uk version velocifero with 10” wheel looking for the complete speedo with clear cover !
|
|
|
|
Post by velocekid2 on Oct 28, 2020 23:20:30 GMT
Hi Stupot, First question - do you have the old 10" wheel speedo unit, even if it's broken or damaged? Unfortunately, the 10" wheel speedo is a cr@p design, so it may be a case of cobbling up something which looks identical to the original.
The clear top cover is virtually a single one time fit only, and is not available as a separate replacement part. |
|
|
|
Post by stupot on Oct 29, 2020 18:15:49 GMT
I have original with the Speedo top centre with the ignition lock directly underneath, speedo works but the white face knocked and the plastic clear screen cracked and discoloured ,considering replacing speedo for the 8” wheel speedo just for MOT if can’t find an original
|
|
|
|
Post by velocekid2 on Nov 2, 2020 1:55:00 GMT
Hi Stupot,
Can you upload an image of your damaged speedo clock - or send it on a PM to me, as this will give me an idea of how easy it can be repaired.
Cheers
|
|
|
|
Post by velocekid2 on Dec 3, 2020 16:34:23 GMT
I have original with the Speedo top centre with the ignition lock directly underneath, speedo works but the white face knocked and the plastic clear screen cracked and discoloured ,considering replacing speedo for the 8” wheel speedo just for MOT if can’t find an original In case you're not aware, if you buy an 8" speedo, it will not fit within the headset moulding for machines fitted with 10" wheels. Also, there were two different mouldings for the 8" wheel headset top, so it may be easier to fix by reading and answering my last post on this subject |
|
